NiteLite ExtraGlow Tips and Hints

NiteLite ExtraGlow  is a 40 wt. polyester thread that glows in the dark for up to six hours.  The white NiteLite thread glows brighter and longer than the other colors. To get the best glowing effect, it is necessary to stitch a lot of thread in the area intended to glow. A simple meandering stitch will not be visible. We recommend filling in an area with embroidery, free motion quilting, or a satin stitch. The denser the stitches, the brighter and more prominent the glow will be. 

Nitelite glowing

Above is an example of a Jellyfish which has been stitched with NiteLite ExtraGlow. Two different stitches were used, a blanket stitch to create the outlying shape and a tight satin/zigzag stitch for the tentacles. You can see how much more radiant the satin stitched sections are compared to the blanket stitch portion. 

This is stitched using white NiteLite. Colors will show up less vibrant due to the color dyeing process it undergoes. 

Before using, test the thread by exposing the thread to either a bright light inside or direct sunlight for 30 seconds, then take it into a dark place and see how bright it glows. 

HOME MACHINE SETTINGS

Recommended needle for Home Machines:  Topstitch 90/14

Tension settings for Home Machine: Reduce Top Tension to 3 and adjust as necessary.

LONGARM MACHINE SETTINGS

Recommended Needle for Longarm Machines: #18 (MR 4.0)

Tension settings for Longarm Machines: Reduce top tension and thread through 2 of the hole guides instead of 3. 

Back to all Education

By: Bob Purcell