FREE SHIPPING  Enjoy free shipping on orders of $50 or more (to U.S. addresses)
Superior Metallic Thread

Metallic Thread Frustrations? We can help!

Trying to turn real metal into a smooth-sewing thread is not an easy task. To successfully run Metallic, make sure the thread you are using has three essential components. Poor quality metallic thread has nearly ruined this product's reputation, but there is quality metallic thread available, and at prices less expensive than some of those very poor imitators. Choose wisely.

3 Essential Components

1. Does it have a nylon core? A nylon core is an indication of strength and quality. Polyester and rayon are weaker. A nylon core, combined with "paper-pasting," prevents tangling.

2. Is it "paper-pasted"? The best Metallic will have a coat of rice paper pasted over the nylon core. This adheres the nylon core to the metal, resulting in a stronger thread. Metallic threads without the rice paper pasting do not hold up as well during high-speed embroidery. Paper-pasting makes the thread cohesive and flexible.

3. Does it have a protective coating? If the thread has a protective coating over the outer metallic layer, the thread will run better and with less friction. An outer coating also protects against fraying and shredding.

Superior Metallics thread was originally made for Japan's kimono industry. It is Japan's finest quality. It can save you money by running smoothly with minimal downtime. Guaranteed to be the best metallic you've ever run.
Choose the best quality thread available. The quality of metallic thread ranges as wide as that of cars. There is the Yugo and there is the Rolls Royce. Quite surprisingly, when compared yard for yard, the price of metallic thread does not vary much regardless of the quality you choose. In the metallic thread world, you will pay the same price, yard for yard, for a Yugo as you will for a Rolls Royce. The main difference is in the spool size. As a general rule, quality metallic threads are not put on small 100 or 200-yard spools. The smallest size is usually a 500-yard spool.

Numerous notions and techniques have been developed to try to make a poor quality thread work. We've heard them all, including: use silicon spray, put the thread in the freezer, position the spool of thread across the room, and turn the spool upside down. If you start with a good quality thread, you will not need all the gimmicks.

The following tips will be sufficient to allow you to fall in love with Metallic:

1. Choose the best quality thread. Select a spool with a large spool core diameter. Avoid the skinny-core spools.
2. Use a Superior Titanium-coated Topstitch needle size #90/14 or a metallic needle, size #90/14. A size 80/12 needle is too small.
3. Loosen the upper tension setting to "one."
4. Use a smooth, lint-free bobbin thread like Bottom Line or So Fine! #50.

Back to all Education

By: Bob Purcell